Setting ADSL Modem Speedy Profesional

This setting is tested on win XP SP2:
 

1. Entrance Control panel -> Internet options
2. Click the Connection tab -> click Setup
3. New connection wizard click next
4. Network connection type select "Connect to the Internet" -> next
5. Getting Ready select "Setup My connection manually" -> next
6. Internet connection select "Connect using a broadband connection That requires a username and password" -> next
7. ISP name filled in freely, eg "master artickel"
8. username: xxxxxxxxx@telkom.net (optional XXXXXXXX no telkom speedy reply given to you)
9. password: yyyyyyyyyy (yyyyyyyyyy optional password that is given to your telecoms)
10. Retype password once again to write down your password
11. Next -> check add desktop shortcut -> finish
12. double click the shortcut then connects to an online (make sure the adsl modem is ready first)
Good luck ...

Reset canon series

Canon Pixma i320, i255

Step 1 : Manual for Service Mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
7. Connect USB cable

Step 2 : Software for permanent reset 

1. Click the link below
2. Download the i255 General Tools, select (USB PORT)
3. Select EEPROM CLEAR and click SET DESTINATION 1
4. Insert the paper and the printer will print a printout of data EEPROM and perform tests for all nozzle printhead (black and color)
5. Turn off the printer.

Canon MP160 , MP145

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Canon pixma ip1700, 1880, 1600, 1200, 1300 

Manual for Service Mode

Turn off the printer
1. Disconnect the power and USB cables
2. Press and hold the POWER button, plug the cable POWER
3. Press the RESUME 2x, release the POWER and RESUME
4. Lights will be blinking for a moment, wait until the light is on steady

Software for permanent reset

1. Plug the USB cable
2. Please open GENERAL SOFTWARE TOOLS and select USB PORT
3. Check in EEPROM CLEAR
4. Click once MAIN (printer lights will blink 1x)
5. Then click the TEST PATTERN 1
6. Turn the printer off

Canon ip1880, MP145, MP530 

This occurs because the ink level in catrik read out by the printer, although still a lot of ink in infusion or just the refill.
To overcome this guampangggg enough .... aja press the Resume button for several seconds (5-8 seconds) after the ink level will become automatic reset and the printer will continue printing.
The same goes for the printer Canon ip1200, 1300,1600,1700,2200.
As for the type of Canon MP160, MP145 simply press the COLOR button to reset the ink level ...
For higher multfunction type, such as type MP530, MP500, MP830, MP800 (like) can by pressing the STOP button.

Solutions E16 Error on Canon MP series

 If you search what's that mean E16 at printer Canon MP Series, the error E16 code is Failed to scan head alignment sheet. I will tell you how to fix the E16, see at below :

- If you see at Printer Status monitor while you printing, you will get the dialog it says your ink is running low.
- So what you need to do? Press the START button, then until 2-3 second press START button again.

I hope that will resolve your problem about error E16.
Code E16 on the printer Canon MP series, meaning "Failed to scan head alignment sheet. "
I will try to tell you how to fix this E16.
 

* Note the Status Monitor on your printer, it would appear the statement that will run out of ink (ink is running low)
* All you have to do is press the START button, then wait 2-3 seconds and then press the START button again.

Canon PIXMA ip1000
Step 1: Manual for Service mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
7. Connect USB cable.

Step 2 : Software for permanent reset
1. Reconnect the printer cable.
2.Open General Tools T5061 and select (USB PORT)
3 .Check on EEPROM CLEAR
4. Click TEST PATTERN 1

Canon MPC190
1. Go to the SERVICE MODE.
by pressing Menu, Copy, Scan, Copy, Copy (just press the button sequence, jgndetained )
2. Select TEST MODE.
3. Select (8) PRINTER TEST in TEST MODE.
4. Select 3. (EEPROM CLEAR).
5. Piliht 0. (INK COUNT).
6. Press the (Set)
7. Press the (Stop / Reset), then press the (ON / OFF)

Tutorial Driver Pack Solution 11

DriverPack Solution is the latest version of the most popular programs for automatic driver installation. This version has many new features and optimized for all platforms (x32 - x64). Thanks to the latest database drivers, the program will install the drivers on any computer!
 
DriverPack Solution simplifies the process of reinstalling Windows on any computer. No more problems with finding and installing drivers. Everything will be done automatically and in a few mouse clicks. This program will install all necessary drivers to any computer within about 5 minutes.
Solution DriverPack 2011 Support for all modern operating systems like Windows XP / Vista / 7 (x86 - x64) Both 64-bit and 32-bit versions!
 
For how to use DriverPack Solution Professional 11 is similar to the cobra drivers but if Cobra Driver Pack 2010 using manual way to install different drivers with DriverPack Solution 11 driver installation automatically. or like the following picture
 
1. After you download and then open it and then double-click on the autorun file like the following

2. Will open the display like the screenshots below and it will automatically find the drivers required to be installed on your PC or laptop then please press the "Upgrade All"

 

3. after the exit page konfirm  installation

and select updet drever
then click start installation.
and drever your computer will be installed automatically


you can download it here 

CAUTION.....!!!!!!
    For how to download you'll be directed to adf.ly then wait a few seconds and look for SKIP AD button located on the right top of your monitor.

Tutorial

COMPUTER PROBLEM

 

Your PC will not act at all? Hard drive undetectable, optical drives, which seem slow, which is not optimal monitor looks, or a router that too often hangs? Do not panic, find the solution here!
Occasionally this can happen. PC suddenly acting up, and can not be resolved easily. Even if you've read the various troubleshooting guide in the manual are available. And this is also happening to you. 

Not looking at the situation and conditions, a system can be acting up. It could be a moment after you perform the update drivers. Or after the addition of enhancements to your system. Or occur suddenly, without warning or prior notice.
And this review will discuss the things mentioned above. Have no need to panic anxiety and deal with it.
Sit quietly, and just follow the discussion this time. Hopefully one of them is the answer to the problems you face with your favorite PC.

Problems on display

Problems on the monitor

Step-step

  1. See indicator light

  2. Check regulator and contrast brightnes

  3. See the display on the screen self-test

  4. Check the power cable on the monitor

  5. Check the cable connection on port data cable video out and display adapter

Cause 

1. Damage display adapter card (normal sound: beep noise ... & there is a problem: biip ... beep ... beep ... beep)

2. Memory / RAM

Problems display adapter

Step-step

1. Check the hardware and software display adapter

2. Resolution display adapter settings by restarting in safe mode by press F8, right click desktop select properties and select the settings tab. On the lower the display resolution settings tab and select Apply - OK. ]

Cause

1. Damage to the operating system and hardware (the hardware itself)

 Problems on your hard drive

 
Save various documents, favorite songs in MP3 format, installation of 3D games (which measure up to units of gigabytes), some even collect video download DivX format, or master digital video transfer from handycam results. It is not strange if the hard drive with full speed. Adding a hard drive too, was not
apart from some problems that may arise.

Hard disk not recognized

Step-step

1. Check the data cable connection and power on hard drive

2. Check the configuration of the BIOS / CMOS setup (select auto detection for convenience)

Cause

1. IDE controller defective

Can not boot from the hard disk

Step-step

1. When you have a HDD controller failure and it can not recognize hard drive can try to check the data cables and BIOS settings.
2. If the message Missing operating system, then change the BIOS setup or the operating system is lost / formatted. To overcome this problem can be re-partition and re-install OS
3. If the message appears Bad or Missing command interpreter can then try booting from a bootable floppy "in accordance with the OS" and then copy the COMMAND.COM file to your hard disk. If you can not save on your hard disk then can check hard disk capacity of full / empty, hard disk exposed to the virus can be overcome with anti virus and also can be no mistake the operating system configuration (CONFIG.SYS) and other possible damage to the hard disk file structure (FAT / SCSI).
4. Can replace with new hard disk and make min 2 partitions for system and data back up.

Cause

1. Hard disk boot record to boot sector damage
2. Bad sectors on the hard disk "location on the hard disk can not be used because of damaged / bad"

See you on the blog masters of other articles

 bye. . . . . . .